Expert Answers about Ram 1500 Classic

• Will Anything Need to Be Removed from 2019 Ram 1500 Classic to Install Westin 21-3565 Nerf Bars
• You sure won't, except for the tape that covers the mounting holes on the back of the rocker panels. Other than a few pieces of tape, nothing existing will need to be removed. If you use the provided link, you can see a product description video for the Westin Platinum Nerf Bars.
  view full answer...


• Trailer Hitch and Brake Controller for 2019 Ram 1500 Classic Towing 4,000 lb Trailer
• The etrailer hitch part # e98852 is a confirmed fit for your 2019 Ram 1500 Classic that does not have a factory hitch and has more than enough towing capacity so it would work great to tow a 4,000 lb travel trailer. Since you already have a weight distribution system and wiring the only other thing you'd want is a brake controller to activate the brakes of your trailer to help stop the trailer. For that the Brake EVN # TK63VR would be a really great option and would only require the install...
  view full answer...


• Installation of Weather Tech WT110024-120024 No-Drill Mud Flaps on 2019 Ram 1500 Classic
• I actually sold a set of the WeatherTech mud flaps like the # WT110024-120024 you've looked at. The flaps do help with splashing, as well as helping to prevent damage from gravel and other debris being kicked up while driving. My buddy Brian has had a set on his Ram 2500 for going on 2 years now, and they're still looking great and working well. There isn't a double-sided tape mounting option available, as it's very unlikely that tape would be durable enough to provide secure adhesion...
  view full answer...


• Can Tow Pro Elite Brake Controller Install in 2020 Ram 1500 Warlock
• To install the Redarc Tow Pro Elite # RED44FR in your 2020 Ram 1500 Classic all you need is the harness part # 331-TPH-020 which plugs in under the dash. The harness will be located underneath the dash and right of the steering column, taped to another harness. There will be a 4-pin connector that mates with the one on the adapter. I attached an install video too that shows where you'll find it as well.
  view full answer...


• Does K-Source Tow Mirror Set for 2019 Ram 1500 Classic Come with All Needed Hardware
• The K-Source tow mirrors part # KS58BV that fits your 2019 Ram 1500 Classic come with all hardware needed to install on your truck. You wouldn't need any additional brackets or hardware to install them.
  view full answer...


• Will the Draw-Tite Hitch for a 2019 Ram 1500 Classic Work With Factory Tow Hooks
• The Draw-Tite Front Mount Trailer Hitch Receiver part # 65062 which is a fit for a 2019 Ram 1500 Classic only requires that the tow hooks be loosened, not removed. They will then be re-secured with the hitch in place.
  view full answer...


• How Does Neck of LaSalle Bristol Utopia Faucet Attach to Valve Body
• I checked with LaSalle Bristol for info on how the fittings you mentioned connect of the # 34420380R340NABX and they send me the following: The spout sleeve has a lip that needs to be inserted into the channel on the spout. Once that is in place the spout will tightly fit into the faucet deck.
  view full answer...


• Brake Controller Recommendation/Installation 2020 Ram 1500 Classic
• I'd be happy to help you with that. I'd recommend a proportional controller, which can sense how quickly the tow vehicle is braking and will then send the appropriate amount of voltage to the trailer brakes so the trailer and the tow vehicle brake at the same rate for safe, reliable and predictable braking. The Tekonsha Prodigy P2 you'd looked at, part # 90885 would be a great choice. You'll also need the # 3024-P wiring harness which plugs into the connector located just above where the...
  view full answer...


• Installing Older Tekonsha Envoy Brake Controller on 2019 Ram 1500 Classic
• The vehicle end gray plug on the Tekonsha Plug-In Wiring Adapter # 3024-P is not available by itself but you can still use this to install the Tekonsha Envoy Brake Controller on your 2019 Ram Classic 1500. You will just need to cut off the controller-end plug on the adapter so that you can hardware it to the pigtail on the Envoy. The wires will match up color to color. You will then be able to plug the controller into the factory port behind the dash of your new Ram just like you did...
  view full answer...


• Is There Trimming Required to Install the # 31-5965 on My 2022 Ram 1500 Classic?
• The Westin E-Series Bull Bar with Skid Plate - 3" Tubing # 31-5965 is confirmed to fit your 2022 Ram 1500 Classic. I went ahead and attached the installation instructions. There is trimming required for installation. If you need a license plate relocation kit, that is part # 32-0055.
  view full answer...


• Will Bumper Cap Fit Back on 2019 Ram 1500 Classic With etrailer Trailer Hitch
• The etrailer Trailer Hitch Receiver # e98852 is a fit for your 2019 Ram 1500 Classic, so you do have the right hitch for your truck. It is rare that the bumper cap can't go back on easily, but the space between the cap and your bumper is definitely evident in the photo you sent. What has worked for some people is to try re-installing and changing the order in which you torque down the bolts to get the hitch to seat a little bit differently and allow the cap to sit down. You can also try...
  view full answer...


• Base Rail Installation Measurements For Reese Base Rails
• The rails on the Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches Item # RP50142-58 should be placed from center to center 22" apart.
  view full answer...


• Would MagnaFlow Turndown Cat-Back Exhaust System Pass Emissions Testing
• Emissions testing is basically just a check to make sure you do not have any check engine lights on. A catback system like the MagnaFlow kit part # MF17108 would not cause any check engine lights to come on so it would not cause you to fail emissions. Where it might get interesting is the visual inspection. This dumps the exhaust right before the rear axle but but does have a muffler so it really depends on how strict the place you go to enforces any restrictions on exhaust. Best option...
  view full answer...


• Do I Need Tape Holding the DeeZee Truck Bed Mat Down or Will it Stay Put
• The DeeZee Custom-Fit Truck Bed Mat part # DZ86917 is very good about staying in the bed of the truck with no additional help. It is a 3/8" thick mat that's quite heavy and there are no issues with it catching air and flying out. You can certainly use some double sided tape if you want but generally it is not required. The other mats that you see including the tape are very light weight and generally do need the tape to stay in.
  view full answer...


• Does Pop & Lock PAL9772 For Ram 1500 Need to Use Wires by Driver's Side Door
• I checked with Pop & Lock for you and for your 2019 Ram 1500 Classic, you do need to run the wires to the driver's side kick panel when installing the Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers # PAL9772.
  view full answer...


• Is a Tee Needed for Air Lift 1000 Heavy Duty Air Helper Springs On 2020 Ram 1500 Classic
• The Air Lift 1000 Heavy Duty Air Helper Springs for Coil Springs part # AL60818HD are a great option for a 2020 Ram 1500 Classic. If you want to control both air bags together then you'll just need a tee like the Air Lift Union Tee for 1/4" Air Lines part # AL21838. It will be better in the long run to install a tee if you're just using the air bags for towing.
  view full answer...


• Can You Drive a 2019 Ram 1500 Classic with Detail K2 Snow Plow on Public Roads
• In regards to driving with a snowplow like the Detail K2 Rampage II Elite Snowplow part # K2RAMP8219ELT which is a fit for a 2019 Ram 1500 Classic using the Custom Mounting Brackets for Detail K2 Snowplows part # K284314, you'll need to check with your local state offices for rules and regulations as they can be different for each state/county. The only issue I can see with this would be blocking the headlights and in which case you could just use the Halogen High/Low Beam Light Kit with...
  view full answer...


• Purpose of Bottom Plate on DeeZee Tailgate Assist Lowering System # DZ43301
• Have no fear! The DeeZee Tailgate Assist Custom Tailgate Lowering System # DZ43301 is the correct kit for your 2019 Ram 1500 Classic and the new bottom plate that was included is supposed to be there. DeeZee recently added this component in place of the single ball mount not because of a difference in the truck but simply to allow for a sturdier connection. The new bottom plate is designed to create a more durable overall system with a longer lifespan. I have attached an image of the...
  view full answer...


• Connecting the Redarc The Manager30 # RED93FR to My Jayco 212QB
• I spoke to my contact at Redarc and they said that the Redarc The Manager30 # RED93FR can work in a trailer when not attached to the vehicle. The shore-power will go through the charge and convert to DC power to charge the batteries. The solar will do the same. The solar and shore-power can be hooked up at the same time. The Manager30 will draw from the solar panels before taking shore-power. Your 2019 Ram 1500 Classic 6 cylinder may have issues towing your Jayco trailer. My research...
  view full answer...


• Installing the Prodigy P3 on a 2019 Ram 1500 Classic
• Yes, you can use the Tekonsha Plug-In Wiring Adapter # 3024-P to simply plug-in the Prodigy P3 # 90195 for installing it on your 2019 Ram 1500 Classic. Please note that since you have the Classic version of the 2019 Ram 1500 your pickup is the same as the 2018 Ram 1500 so it doesn't make sense as to why you wouldn't be able to install an aftermarket controller on your pickup. The installation will be the exact same as it is on the attached video of this on a 2017 Ram 1500 which I have...
  view full answer...